accessibility__skip_menu__jump_to_main

Volltext : Berechnung von Gezeitengrundwerten über die Analyse der halbmonatlichen Ungleichheit (BSH-Berichte, Nr. 57)

>

Modelling the water level data and calculating the tidal parameters | 31 |

The analysis is usually carried out with observation series over 5 years. This is
a shorter period than the 19 years used in detailed tidal analyses in order to
take into account all relevant astronomical influences (including the nodal
3ycle). Due to the shorter period, short-term developments (e.g. due to a
shange in morphology or construction measures in the vicinity of the tide
gauge) are deliberately given greater consideration.

The input data is filtered as follows during the operational calculation of the tidal
parameters: high water and low water data that have received special markings
during processing by the authorities are not included in the analysis (disturbed
data). Events for which the heights or intervals deviate from the respective
mean value by more than three times the standard deviation are also filtered
out before the analysis. The analysis of the semi-monthly inequality takes place
in two iterations. After the first iteration, the data that deviates by more than
three standard deviations from the determined model function is filtered out
again. In the calculations for the tide tables 2003 to 2019 inclusive, the filtering
of the observation data was based on 0.6 times the mean tidal range (instead of
the criterion of three standard deviations).

3.2
Referencebased
 calculation
 with sparse
observation
data

A special case arises If there is not enough observation data available for a tide
gauge over the desired period. In this case, the tidal parameters can be determined
 using a reference-based calculation using water level data from a referance
 tide gauge. The reference gauge must provide sufficient data so that the
zoefficientS ag ref, Ajrer ANd b; 2: Can be calculated as described above (for
a better overview, the indices HWH, NWH, HWI, NWI are omitted here). The differences
 Ayft) = y(t) - Yyrer(f) are determined for all high and low water for which
data are available from both the reference gauge and the subordinate gauge.
The least squares method is then applied to the difference

4
Ay(t) = y(t) — Yrer(t) = Aag + (has cos(igt) + Ab;sin(iogt))
1=1

in ordert o determine the coefficients Aap, Aa; and Ab; Thus, the coefficients for
the subordinate tide gauge are

a9 = AQ9 + Ao,ref
a; = Ad; + Qpref
a; = AD; + Diret

For an independent analysis, at least 500 * number_of_observation_years of
nigh or low water are required in the operational service, where number_of_
observation_years is usually = 5. Ifthere is less data, a reference-based calculation
 for high and/or low water is attempted
            
Waiting...

Nutzerhinweis

Sehr geehrte Benutzerin, sehr geehrter Benutzer,

aufgrund der aktuellen Entwicklungen in der Webtechnologie, die im Goobi viewer verwendet wird, unterstützt die Software den von Ihnen verwendeten Browser nicht mehr.

Bitte benutzen Sie einen der folgenden Browser, um diese Seite korrekt darstellen zu können.

Vielen Dank für Ihr Verständnis.