Final Report of BeJamDetect Project 
Z 
Voir 
GPS satellites PRN 19 and PRN 24 and Galileo PRN 25. The reception of low-altitude 
satellites (see GPS PRN 10) can also be impaired in the presence of an interference signal. 
4.3. Experimental set-up 
The measurement set-up was implemented by using an all-weather electrical cabinet-box of Rittal 
as shown in Figure 4-9. 
The block diagram of the set-up Is shown in Figure 4-10. The set-up within the Rittal-box is shown 
in Figure 4-11. The use of an additional small PC Rasberry Pi 4 was motivated by the need of storing 
log-files of the GALANT receiver which are helpful for the post-processing analysis of the system 
performance and an eveluation of the RFI situation. This component is not strictly necessary. Also, 
most of other components of the measurement set-up were required only because of the needs of 
this specific test campaign, e.g. remote monitoring of the system status over an LTE-link, and can 
be either removed or substituted by more compact components in a more practical 
implementation. 
Figure 4-9: Installation of Demonstrator 2 on ship of Bundespolizei See 
Title: Final Report 
Version: 1.0 
age: 45